We are pleased to announce a new Noise Warning Sign, imaginatively called the NoiseSign.
The NoiseSign's trigger level can be set between 40 and 114 dB(A), making it ideal for both noisy and quiet environments:
Two different displays are available, one for Noisy Environments and one for Quiet Zones.
Many industrial processes have occasions when the noise level exceeds an acceptable limit. Rather than insisting that staff wear hearing protection at all times, the NoiseSign can inform them when the levels are high.
In areas that should remain quiet, a gentle reminder from the NoiseSign is better than a personal reminder, which will often cause offense. When the noise levels get above an acceptable limit, the sign lights up and gives the very clear SHHH! Quiet Zone message.
This is an optional plug-in unit that can be bought at the same time as the NoiseSign or added at a later date. It comes complete with software and plugs directly into your computer's USB port, like a memory stick.
To help spread the noise warning around a larger area, one NoiseSign can be connected to up to three remote display units. A remote sign mounted at the door to a noisy area can warn staff before they enter.
Each remote display comes complete with a 32ft cable to connect back to the main unit or back to another remote sign.
If the noise needs to be measured away from the NoiseSign an extension cable with a Remote Preamplifier and Type 2 Microphone can be used. The microphone can then be mounted up to 30ft from the sign.
An Outdoor Microphone with weather protection can be mounted outside, with the NoiseSign itself mounted inside. For example, it can warn operators in a Control Room if high noise levels are being generated outside by a steam valve, machinery or other industrial processes.