EspaƱolYour region
 
Tel.  +44 845 680 0313
info@noisemeters.com
Home > Products > Noise Warning Signs > SoundEar > SoundEar 3-320 Noise Processor > Installation

SoundEar 3-320 Noise Processor

soundear 3 noise processor and sound levle monitor
SoundEar 3 Noise Processor

Installation

The SoundEar 3-320 is usually wall mounted, using the mounting plate and security screw that are included. As long as there is a power outlet nearby and a surface that can accept four mounting screws, there are few limitations on the physical location of the device. The most important consideration is that it is in the most suitable position to measure the noise levels.

The installation consists of the following steps (also covered in the user manual):

  • Remove the mounting plate from the back of the SoundEar 3-320
  • Fix the mounting plate to the wall with four screws
  • Hang the SoundEar 3-320 on to the mounting plate
  • Insert the security screw to stop the monitor being easily removed
  • Plug in and switch on

An optional microphone extension cable can be used to mount the microphone away from the unit itself.

Mounting the SoundEar 3-320

remove security screw
Remove the security screw
remove mounting plate
Remove the mounting plate
fix mounting plate to wall
Fix the mounting plate to the wall
mount soundear 3-320
Mount the device and fit the security screw

Power

power adapter
Power Adapter

The SE3-320 comes complete with a plug-top power adapter. This provides the safe low voltage that the noise sign requires.

The SoundEar 3 has been developed for use in areas that need high electrical safety, such as hospitals. This optional P-SE3-MED power adapter is approved in accordance with IEC 60601-1 (medical electrical equipment).

 

Extension Power Cable - The power adapter that is included uses a 5V USB style cable. This is convenient as both power supply and cable are readily available if they need replacing. However, USB cables are not suitable for more than a few metres. If you need to run power for a longer distance then you need the PSU24DC power adapter with one or more POWEX10 extension cables. This can be found in the Parts tab at the bottom of this page, or on the Options page.

 

Mounting the SE3-320W Outdoor Noise Processor

Installation of the outdoor version of the noise processor is slightly different, but just as straight forward. It uses just four screws to mount to the wall. The type of screw used depends on the surface being mounted to (wood, brick, etc.)

You can read more about installation on the Outdoor Noise Processor page.

 

SE3-320
$980.00
SoundEar 3 Noise Processor
In stock
SE3-320W
$1519.00
Outdoor SoundEar 3 Noise Processor
2 weeks
More pricing information

SoundEar Range

SoundEar Classic
SoundEar Classic
Noise Warning Sign
From $462.00
SoundEar II
SoundEar II
Noise Warning Sign
From $561.00
SoundEar II
SoundEar II
Industrial Noise Sign
From $561.00
SoundEar 3
SoundEar 3
Advanced Logging Sign
From $1235.00
Industrial Noise Sign
Industrial Noise Sign
Advanced Industrial Sign
From $1235.00
SoundEar 3-320
SoundEar 3-320
Noise Processor
From $980.00
NoiseGuide
NoiseGuide
Office and Call Center
From $682.00

How to Buy

Credit Card
Click the button or call +44 845 680 0313.

Purchase Order
To: info@noisemeters.com
Or by fax: +44 845 680 0316.

Information Request




Prices and Ordering

The SoundEar 3-320 Noise Processor with power adapter and software.

Order Code
Description
Purchase
Price (USD)
 
SE3-320
$980.00
In stock
SE3-320W
$1519.00
2 weeks

 

Telephone +44 845 680 0313  
info@noisemeters.com  
Home - Contact - Applications - Products - News - Resources - Search - Help
Sound Level Meters - Dosimeters - Noise Signs - Microphones & Calibrators